© 2021 Jason® Hydrotherapy • 501.771.4477
Page 13 of 28
Customer Service : 800.255.5766
FEATURES, CONTROLS AND OPERATING INSTRUCTIONS (cont.)
DIGITAL KEYPAD ELECTRONIC CONTROLS
The SPEED icon is used to increase or decrease the
blower speed once the blower is ON.
• Press to enter into the blower speed menu.
• Press and hold the - icon to decrease the blower speed
until the desired intensity is reached.
• Press and hold the + icon to increase the blower speed
until the desired intensity is reached.
• Press the button once to change the speed by
one. Press and hold to increase the speed change
increments.
• The blower will recall the chosen speed on any mode
change but will reset to full speed after the system is
powered off.
Blower SPEED Icon
MICROSILK
®
Icon
The MICROSILK
®
icon is used to activate the
MicroSilk
®
unit and the 20-minute timer.
• Once pressed, the microbubble generator will start and
the icon will turn BLUE.
• Pressing the icon again will shut the unit OFF and the
icon will turn WHITE.
• Starting the MicroSilk
®
unit will turn OFF any other
therapy equipment running at that time.
The AIRMASSEUR
®
icon is used to activate the
blower and the 20-minute timer.
AIRMASSEUR
®
Icon
•
CONSTANT Mode will start with the first press and the
icon will turn BLUE.
• Pressing the icon again will shut the blower OFF and the
icon will turn WHITE.
• Once the system returns to Standby mode, the display
will indicate a dry cycle purge countdown. After twenty
(20) minutes, the blower will open for two (2) minutes
to allow the air channel to dry. This purge cycle can be
canceled by selecting the CANCEL button.
• Starting the AirMasseur
®
will turn OFF any other therapy
equipment running at that time.
The PILLOW icon is used to activate the neck jets when
the Jetted Neck Pillow option is ordered. This icon will
appear once the Whirlpool pump has been activated.
• The initial press of the button will display the current
Pillow status.
•
CONSTANT flow from the neck jets will start with the first
press and the icon will turn BLUE.
• PULSE #1 Mode will start with the next press and the two
neck jets will pulse together.
• PULSE #2 Mode will start with the next press, indicated
by the two neck jets alternating pulses.
• Pressing the icon again will turn the neck jets OFF and
the icon will turn WHITE.
• Once the system returns to Standby mode, the display
will indicate a dry cycle purge countdown. After twenty
(20) minutes, the solenoids will open for two (2) minutes
to allow the plumbing lines to drain. This purge cycle can
be canceled by selecting the CANCEL button.
PILLOW Icon (optional)
The MODE icon is used to change performance
once the blower is ON.
•
WAVE Mode will start with the first press, indicated
by the blower speed rising and lowering in a wave
fashion.
• PULSE Mode will start with the next press, indicated
by the blower speed rising and lowering in an on/off
fashion.
• CONSTANT Mode will return with the next press of
the icon button.
Blower MODE Icon
The WHIRLPOOL icon is used to activate the
whirlpool pump and the 20-minute timer.
• Once pressed, the whirlpool pump will start and
and the icon will turn blue.
• Pressing the icon again will shut the pump OFF
and the icon will turn white.
• Starting the Whirlpool pump will turn OFF any
other therapy equipment running at that time.
WHIRLPOOL Icon
