© 2021 Jason® Hydrotherapy • 501.771.4477
Page 9 of 28
Customer Service : 800.255.5766
FEATURES, CONTROLS AND OPERATING INSTRUCTIONS (cont.)
One main control touchpad mounted on the bath features several icons used by the bather to control the bath. This sec-
tion will outline the functions of the system when a particular icon is pressed. If the icon is lit WHITE, then that particular
option is available to operate. If the icon is lit BLUE, that particular option is currently in operation.
Unless otherwise indicated an ON/OFF function will take place with a single press on the button icon. Some functions may
require the use of a long press. Also, all therapy types (WP, AM and MS) are “interlocked” by the software so that only one
therapy type can be operated at a time. A built-in timer shuts off the therapy equipment twenty (20) minutes after being
activated.
Standby Mode
In Standby Mode, no icons will be lit so only the JASON logo and non-lit Power icon can be seen. If the keypad is ON but
there has been no activity for one (1) hour, the keypad will revert to Standby Mode.
STANDARD EDITION OPERATING INSTRUCTIONS
POWER Button
• Once pressed, all available option icons will
light WHITE and the POWER icon will light
BLUE.
•
Press and hold for two (2) seconds to turn off
all equipment and return to Standby Mode.
The POWER icon will activate the keypad.
LED Icon
• Once pressed, the icon will turn blue and the LED
lights will begin a SLOW FADE mode between all
the colors.
• A single press of the icon will progress the light to
the next mode or color.
• Press and hold the icon to cycle through the FADE
mode, release the icon to choose any custom
color.
• Order of Colors: Slow Fade Mode, Color Step
(changes each second), Purple, Green, Red, Blue,
Yellow, White, then Off.
The LED icon will operate the Chromatherapy
Mood Lighting system. The LED system will
operate for 2 hours before turning OFF.
The PILLOW icon is used to activate the neck jets
when the Jetted Neck Pillow option is ordered.
This icon will appear once the Whirlpool pump has
been activated.
PILLOW Icon
•
CONSTANT flow from the neck jets will start with the
first press and the icon will turn BLUE.
• PULSE Mode will start with the next press, indicated
by a slow flash of the icon.
• ALTERNATING Mode will start with the next press,
indicated by a rapid flash of the icon.
• Pressing the icon again will turn the neck jets OFF
and the icon will turn WHITE.
• Once the system returns to Standby mode, the icon
will flash GREEN to indicate a purge countdown. Af
-
ter twenty (20) minutes the solenoids will open for two
(2) minutes to allow the plumbing lines to drain. This
will be indicated by the PILLOW icon turning GREEN.
This purge cycle can be canceled by pressing and
holding the power button for five (5) seconds.
WHIRLPOOL Icon
The WHIRLPOOL icon is used to activate the
whirlpool pump and the 20-minute timer.
• Once pressed, the whirlpool pump will start and
the icon will turn BLUE.
• Pressing the icon again will shut the pump OFF
and the icon will turn WHITE.
• Starting the Whirlpool pump will turn OFF any oth-
er therapy equipment running at that time.
