Jason International, Inc. •
501.771.4477
Page 8 of 25
Customer Service : 800.255.5766
Copyright © 2018 Jason International, Inc.
FEATURES, CONTROLS AND OPERATING INSTRUCTIONS (cont.)
One main control touchpad mounted on the bath features several icons used by the bather to control the bath. This sec-
tion will outline the functions of the system when a particular icon is pressed. If the icon is lit WHITE, then that particular
option is available to operate. If the icon is lit BLUE, that particular option is currently in operation.
Unless otherwise indicated an ON/OFF function will take place with a single press on the button icon. Some functions may
require the use of a long press. Also, all therapy types (WP, AM and MS) are “interlocked” by the software so that only
one therapy type can be operated at a time. A built-in timer shuts off the therapy equipment twenty (20) minutes after be-
ing activated.
Standby Mode
In Standby Mode, no icons will be lit so only the JASON logo and non-lit Power icon can be seen. If the keypad is ON but
there has been no activity for one (1) hour, the keypad will revert to Standby Mode.
The PILLOW icon is used to activate the neck jets
when the Jetted Neck Pillow option is ordered.
This icon will appear once the Whirlpool pump has
been activated.
•
CONSTANT flow from the neck jets will start with
the first press and the icon will turn BLUE.
•
PULSE Mode will start with the next press, indicated
by a slow flash of the icon.
•
ALTERNATING Mode will start with the next press,
indicated by a rapid flash of the icon.
•
Pressing the icon again will turn the neck jets OFF
and the icon will turn WHITE.
•
Once the system returns to Standby mode, the icon
will flash GREEN to indicate a purge countdown.
After twenty (20) minutes the solenoids will open
for two (2) minutes to allow the plumbing lines to
drain. This will be indicated by the PILLOW icon
turning GREEN. This purge cycle can be canceled
by pressing the holding the power button for five (5)
seconds.
STANDARD/PREMIER EDITION OPERATING INSTRUCTIONS
POWER Button
WHIRLPOOL Icon
LED Icon
PILLOW Icon
The POWER icon will activate the keypad.
• Once pressed, all available option icons will
light WHITE and the POWER icon will light BLUE.
•
Press and hold for two (2) seconds to turn off all
equipment and return to Standby Mode.
The WHIRLPOOL icon is used to activate the whirl-
pool pump and the 20-minute timer.
• Once pressed, the whirlpool pump will start and
the icon will turn BLUE.
•
Pressing the icon again will shut the pump OFF and
the icon will turn WHITE.
•
Starting the Whirlpool pump will turn OFF any other
therapy equipment running at that time.
The LED icon will operate the Chromatherapy
Mood Lighting system. The LED system will
operate for 2 hours before turning OFF.
• Once pressed, the icon will turn blue and
the LED lights will begin a SLOW FADE mode
between all the colors.
•
A single press of the icon will progress the light to
the next mode or color.
•
Press and hold the icon to cycle through the
FADE mode, release the icon to choose any
custom color.
•
Order of Colors:
-Slow Fade Mode
-Color Step (changes each second)
-Purple
-Green
-Red
-Blue
-Yellow
-White
-Off
