Page 5 of 7
ASSEMBLY INSTRUCTIONS
Blackjack LShaped
Corner Executive Desk
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Locate the plastic support bracket (13) over the centre of the top rail,
and click into place.
Optional: For extra strength, the plastic support bracket can be
screwed onto the top rails.
Choose if you want your return to be on user’s left hand (LH) return or
user’s right hand (RH) return. The next install diagrams 12 to 20 have the
tops turned upside down on th floor. Remember the LH or RH you chose
will reverse when the desktops are upside-down.
Place desktops upside-down, push tightly together. Position joining plates
(15) accoss each top then screw fix with M5x20mm screws (23). (Remem-
ber left hand and right hand will reverse when the tops assembly is
rotated correct way up from this upside-down position.
* Above shows RH configuration.
12
09
10
RH Return
LH Return
11
