Slide 2 large feet (4) into the collar, place the 150° gasket (9) on top and fully
tighten the 2 M8x16mm bolts (13) into the collar (7) . (Repeat with all collars).
Place a leg pole tube (3) on top of a collar. Align the notch. Fully tighten the
M10x110 bolt (12), spring washer and flat washer through the collars. Repeat
for both leg assemblies.
Place the upper wrist (1) on top of the leg tube, making sure each small
notch in the top of the leg tube is in-line with the bumps on the bottom of
the upper wrist. Fully tighten to maximum tension the M10x30mm bolts (11).
Repeat for both leg assemblies.
Screw all glides (5) into the base of the large feet, leaving the glides one turn
from tight (then they can be adjusted easily if the floor is uneven).
Page 3 of 5
12
11
1
3
13
9
4
5
7
ASSEMBLY INSTRUCTIONS
Blackjack Boardroom Table
Indented Chrome Legs
Need help!
Call us on
1300 527 665
www.jasonl.com.au
01
02
03
04
* The top of the leg tube has
more rim notches than the
bottom of the leg tube.
