ASSEMBLY INSTRUCTIONS
Litewall Workstation
3 Person Run
Size: 1200mm
Screw the feet to each leg and T leg.
Assemble connector frames. Attach the x2 T leg to the connector frames using
M6x35mm hex scews x4.
Attach x2
Central Beams (800mm)
to the connector frames using M8x25mm
dome head screw.
Attach x2
Outer Beams (1000mm)
to leg using M8x25mm dome head screw.
Attach connector frame from diagram 2 to 2 beams using M8x25mm dome
head screws. Do the same procedure for the opposite side.
Page 3 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
02
01
03
04
