ASSEMBLY INSTRUCTIONS
Quadro Square leg 4 person
corner workstation
H configuration
Sizes: 1400Lx1800W , 1600Lx1800W , 1800Lx1800W mm
Page 11 of 11
STEP 9
Bring partition towards one another as on the picture. Using an Allen key remove top caps from the four screens uprights where they meet
(circles painted in gray).
Slide 2 way connectors rod - down between the 2 centre screens and slide the 3 way 90 degree connector rod -down between the end screens.
Under the desktops, use l-shaped panel brackets to secure the screens to the table tops
(A)(B)
. Place two brackets in each screen.
Floor based screen divider assembly instruction:
If you
purchased with
screens divider
Need help!
Call us on
1300 527 665
www.jasonl.com.au
