Cautions!
Make sure all cables are connected to control box before power up.
'DOWN' Button
'UP' Button
V1.0 Pg.15/15
Caution!
Duty cycle: Max. 2min ON / 18 min OFF.
Reset operation as below :
1.One time reset
For the first powered up, press and hold both 'Up' and 'Down' buttons,
simultaneously for more than 3 seconds until the desk moves down to
lowest position.
After checking the signal motor constant, reset was completed and ready
to use.
*The initialization procedure must be completed before the first running
after the table is installed or parts are prepared.*
2.Any dismantle of electrical component follow below procedure.
Follow procedure no.1 again.
Assembly Instruction: Reset The Desk Before Use
