Page 2 of 4
ASSEMBLY INSTRUCTIONS
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Uniform Reception
Assemble side panel 2R & 2L into plinth
as shown in figure above.
Mount assembly STEP 1 onto front panel
as shown in figure above.
Mount assembly STEP 3 onto assembly
STEP 4 as shown in figure above.
Mount assembly STEP 4 onto top panel
as shown in figure above.
Assemble panel R, panel L & center panel
onto base panel as shown in figure above.
Side panel 2R
Side panel 2L
Panel R
Panel L
Center Panel
Plinth
Front panel
Top panel
Base panel
Step 1
Step 2
Step 3
Step 4
Step 5
Final assembly
Function of Klix Cam
Turn for locking
75° Min - 195° Max
Make sure the arrow is pointing
upwards before inserting into
the panel’s hole.
Function of Klix Cam
Turn for locking
75° Min - 195° Max
Make sure the arrow is pointing
upwards before inserting into
the panel’s hole.
Function of Klix Cam
Turn for locking
75° Min - 195° Max
Make sure the arrow is pointing
upwards before inserting into
the panel’s hole.
Function of Klix Cam
Turn for locking
75° Min - 195° Max
Make sure the arrow is pointing
upwards before inserting into
the panel’s hole.
UNCH1362
Counter Head
