12
Function maximum power:
• In this function you can program the operating time, but you can not adjust the temperature as it is already set.
• For this press
“Preset tiempo”
. The minute side of the display will start blinking.
• Slide your finger across the slider or let down “+ or -” to set the minutes.
• To adjust the hours, press “
Preset tiempo.
” and slide your finger again by the regulator or let down “+ or -”.
• Once the time is set, this will be fixed in a few seconds. The display will stop flashing.
• You can stop the operation by pressing “
Pausa
”.
• To resume, press again.
• It must be taken into account that the device will automatically switch off 2 hours after pressing “
Pausa
”.
• To turn off the unit press and disconnect it from the network.
MAINTENANCE AND CLEANING
• Before you proceed to cleaning, unplug the appliance from the mains and wait until the plate is totally cold.
• You can clean the body with a slightly dampened cloth.
• To clean the plate it is enough to use a slightly dampened cloth with soap. You also can clean the plate with
special products to clean vitro ceramic plates.
• If there are some hard residues you can use a scraper suitable for vitro ceramic hobs.
• Do not use abrasive or chemical products, metallic scourers, and such may deteriorate the surfaces.
ENVIRONMENT PROTECTION
• Dispose the appliance according to the local garbage regulations.
• Never throw it away to the rubbish. So you will help to the improvement of the environment.
01 manual jata VIN145.indd 12
28/07/16 18:20
