13
MANUAL DE INSTRUCCIONES • INSTRUCTION MANUAL • MANUAL DE INSTRUÇÕES
SUBSTITUIÇÃO DA AGULHA
1. 1. Retire a ficha da tomada de corrente
2. 2. Levante a agulha para a sua posição mais elevada.
3. 3. Baixe o pé-calcador
4. 4. Retire a agulha, aliviando o parafuso da agulha
com uma moeda.
5. 5. Coloque outra agulha com a parte plana virada
para trás e suba-a até que chegue a tocar com o
topo superior.
Verificação da agulha
1. A agulha deve sempre estar bem direita e afiada
2. Para se certificar de que a agulha não está dobrada,
deite-a sobre uma superfície plana e com a parte
plana para baixo.
3. Substitua a agulha se estiver dobrada ou gasta.
REPLACING THE NEEDLE
1. Remove the power supply plug from the outlet.
2. Raise the needle bar to its highest position.
3. Lower the presser foot
4. Remove the needle by loosening the needle clamp
with a coin.
5. Insert a different needle as far as possible up against
the needle stopper with its flat side facing the back.
Checking the needle
1. The sewing needle must always be straight and
sharp for smooth sewing.
2. To check if the needle is bent, place the flat side of
the needle down as shown in the illustration.
3. Replace the needle if it is bent or dull.