AT-114
[RE4F04B]
DTC P0705 PARK/NEUTRAL POSITION SWITCH
Revision: November 2006
2006 Altima
3.
DETECT MALFUNCTIONING ITEM
Check the following item:
●
Park/neutral position (PNP) switch
Check continuity between park/neutral position (PNP) switch
F29 terminals 1 and 2 and between terminals 3 and 4, 5, 6, 7, 8
and 9 while moving manual shaft through each position.
OK or NG
OK
>> GO TO 5.
NG
>> GO TO 4.
4.
CHECK MANUAL CONTROL CABLE ADJUSTMENT
Check PNP switch again with manual control cable disconnected from manual shaft of A/T assembly. Refer to
test group 1.
OK or NG
OK
>> Adjust manual control cable. Refer to
AT-270, "Control Cable Adjustment"
NG
>> Repair or replace PNP switch.
5.
DETECT MALFUNCTIONING ITEM
Check the following items:
●
Harness for short or open between ignition switch and park/neutral position (PNP) switch (Main harness)
●
Harness for short or open between park/neutral position (PNP) switch and TCM (Main harness)
●
Fuse
●
Ignition switch
Refer to
PG-4, "POWER SUPPLY ROUTING CIRCUIT"
.
OK or NG
OK
>> GO TO 7.
NG
>> Repair or replace damaged parts.
Lever position
Terminal No.
P
3 - 7
1 - 2
R
3 - 8
N
3 - 9
1 - 2
D
3 - 6
2
3 - 5
1
3 - 4
WCIA0459E