AT-14
[RE4F04B]
PREPARATION
Revision: November 2006
2006 Altima
PREPARATION
PFP:00002
Special Service Tools
ECS0095P
The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.
Tool number
(Kent-Moore No.)
Tool name
Description
KV381054S0
(J-34286)
Puller
●
Removing differential side oil seals
●
Removing differential side bearing outer
race
●
Removing idler gear bearing outer race
a: 250 mm (9.84 in)
b: 160 mm (6.30 in)
ST33400001
(J-26082)
Drift
●
Installing differential side oil seal
(RH side)
●
Installing oil seal on oil pump housing
a: 60 mm (2.36 in) dia.
b: 47 mm (1.85 in) dia.
(J-34301-C)
Oil pressure gauge set
1 (J-34301-1)
Oil pressure gauge
2 (J-34301-2)
Hoses
3 (J-34298)
Adapter
4 (J-34282-2)
Adapter
5 (790-301-1230-A)
60
°
Adapter
6 (J-34301-15)
Square socket
Measuring line pressure
ST27180001
(J-25726-A)
Puller
Removing idler gear
a: 100 mm (3.94 in)
b: 110 mm (4.33 in)
c: M8 x 1.25P
ST23540000
(J-25689-A)
Pin punch
Removing and installing parking rod plate and
manual plate pins
a: 2.3 mm (0.091 in) dia.
b: 4 mm (0.16 in) dia.
ST25710000
(J-25689-A)
Pin punch
Aligning groove of manual shaft and hole of
transaxle case
a: 2 mm (0.08 in) dia.
NT414
NT086
AAT896
NT424
NT442
NT410