AT-294
[RE4F04B]
DISASSEMBLY
Revision: November 2006
2006 Altima
c.
Remove needle bearings from rear planetary carrier assembly.
d.
Check rear planetary carrier, rear sun gear and needle bearings
for damage or wear.
e.
Check clearance between pinion washer and rear planetary car-
rier with feeler gauge.
Replace rear planetary carrier if the clearance exceeds allow-
able limit.
34. Remove rear internal gear and forward clutch hub from tran-
saxle case.
35. Remove overrun clutch hub from transaxle case.
36. Remove needle bearing from overrun clutch hub and check for
damage or wear.
SAT028F
Standard clearance
: 0.20 - 0.70 mm
(0.0079 - 0.0276 in)
Allowable limit
: 0.80 mm (0.0315 in)
SAT054D
SAT029F
SAT030F
SAT031F