REPAIR FOR COMPONENT PARTS
AT-323
[RE4F04B]
D
E
F
G
H
I
J
K
L
M
A
B
AT
Revision: November 2006
2006 Altima
2.
Install piston assembly by turning it slowly.
CAUTION:
Apply ATF to inner surface of drum.
3.
Install return springs and spring retainer on piston using Tool.
CAUTION:
●
Set Tool directly over springs.
4.
Set Tool on spring retainer and install snap ring while compressing return springs.
5.
Install drive plates, driven plates, retaining plate and dish plates.
CAUTION:
Take care with the order of plates.
6.
Install snap ring using suitable tool.
CAUTION:
Do not expand snap ring excessively.
7.
Measure clearance between retaining plate and snap ring. If not
within allowable limit, select proper retaining plate.
SCIA3319E
Tool number
: KV31102400 (J-34285 and J-34285-87)
SCIA5387E
SCIA4886E
Specified clearance
Standard
: 0.5 - 0.8 mm
(0.020 - 0.031 in)
Allowable limit
: 1.2 mm (0.047 in)
Retaining plate
SCIA3321E