REPAIR FOR COMPONENT PARTS
AT-325
[RE4F04B]
D
E
F
G
H
I
J
K
L
M
A
B
AT
Revision: November 2006
2006 Altima
3.
Remove snap ring using suitable tool.
4.
Remove drive plates, driven plates and retaining plate.
5.
Remove snap ring from high clutch drum while compressing
return springs using Tool.
CAUTION:
●
Set Tool directly over springs.
●
Do not expand snap ring excessively.
6.
Remove cancel force cover and return springs.
7.
Remove piston from high clutch drum by turning it.
INSPECTION
High Clutch Snap Ring, Spring Retainer and Return Springs
Check for deformation, fatigue or damage. Replace if necessary.
CAUTION:
Always replace the spring retainer and return springs as a set.
High Clutch Drive Plates
●
Check facing for burns, cracks or damage.
●
Measure thickness of facing.
●
If not within wear limit, replace.
SAT095F
Tool number
: KV31102400 (J-34285 and J-34285-87)
SCIA5388E
SAT111F
Thickness of drive plate:
Standard value
: 1.6 mm (0.063 in)
Wear limit
: 1.4 mm (0.055 in)
SAT162D