REPAIR FOR COMPONENT PARTS
AT-327
[RE4F04B]
D
E
F
G
H
I
J
K
L
M
A
B
AT
Revision: November 2006
2006 Altima
5.
Install snap ring using suitable tool.
CAUTION:
Do not expand snap ring excessively.
6.
Measure clearance between retaining plate and snap ring. If not
within allowable limit, select proper retaining plate.
7.
Check operation of high clutch.
8.
Install new seal rings to input shaft.
CAUTION:
●
Do not reuse seal rings.
●
Apply petroleum jelly to new seal rings.
●
Roll paper around new seal rings to prevent them from
spreading.
SAT095F
Specified clearance
Standard
: 1.8 - 2.2 mm (0.071 - 0.087 in)
Allowable limit
: 2.8 mm (0.110 in)
Retaining plate
: Refer to
.
: Refer to
.
SCIA4892E
SAT196D
SAT197D
SAT198D