REPAIR FOR COMPONENT PARTS
AT-329
[RE4F04B]
D
E
F
G
H
I
J
K
L
M
A
B
AT
Revision: November 2006
2006 Altima
DISASSEMBLY
1.
Check operation of forward clutch and overrun clutch.
a.
Install bearing retainer on forward clutch drum.
b.
Apply compressed air to oil hole of forward clutch drum.
c.
Check to see that retaining plate moves to snap ring.
CAUTION:
If retaining plate does not contact snap ring:
●
D-ring might be damaged.
●
Oil seal might be damaged.
●
Fluid might be leaking past piston check ball.
2.
Remove snap ring for forward clutch using suitable tool.
3.
Remove drive plates, driven plates, retaining plate and dish
plate for forward clutch.
4.
Remove snap ring for overrun clutch using suitable tool.
5.
Remove drive plates, driven plates, retaining plate and dish
plate for overrun clutch.
6.
Remove snap ring from forward clutch drum while compressing
return springs using Tool.
CAUTION:
●
Set Tool directly over return springs.
●
Do not expand snap ring excessively.
7.
Remove spring retainer and return springs.
CAUTION:
Do not remove return springs from spring retainer.
SAT123F
SAT203D
SAT204D
Tool number
: KV31102400 (J-34285 and J-34285-87)
SCIA5389E