AT-330
[RE4F04B]
REPAIR FOR COMPONENT PARTS
Revision: November 2006
2006 Altima
8.
Remove forward clutch piston with overrun clutch piston from
forward clutch drum by turning it.
9.
Remove overrun clutch piston from forward clutch piston by
turning it.
10. Remove D-rings and seal rings from forward clutch piston and
overrun clutch piston.
CAUTION:
Do not reuse D-rings and seal rings.
INSPECTION
Snap Rings, Spring Retainer and Return Springs
●
Always replace spring retainer and return springs as a set.
●
Check for deformation, fatigue or damage. Replace if necessary.
Forward Clutch and Overrun Clutch Drive Plates
●
Check facing for burns, cracks or damage.
●
Measure thickness of facing.
●
If not within wear limit, replace.
SAT125F
SAT126F
SCIA3046E
Thickness of drive plate:
Forward clutch
Standard value
: 1.6 mm (0.063 in)
Wear limit
: 1.4 mm (0.055 in)
Overrun clutch
Standard value
: 1.6 mm (0.063 in)
Wear limit
: 1.4 mm (0.055 in)
SAT162D