REPAIR FOR COMPONENT PARTS
AT-333
[RE4F04B]
D
E
F
G
H
I
J
K
L
M
A
B
AT
Revision: November 2006
2006 Altima
●
Do not align snap ring with the spring retainer assembly
stopper.
6.
Install drive plates, driven plates, retaining plate and dish plate
for overrun clutch and install snap ring for the overrun clutch
using suitable tool.
CAUTION:
Take care with the order of plates.
7.
Measure clearance between overrun clutch retaining plate and
snap ring.
If not within allowable limit, select proper retaining plate.
8.
Install drive plates, driven plates, retaining plate and dish plate
for forward clutch and install snap ring for the forward clutches
using suitable tool.
CAUTION:
Take care with the order of plates.
9.
Measure clearance between forward clutch retaining plate and
snap ring.
If not within allowable limit, select proper retaining plate.
SAT134F
SAT204D
Specified clearance
Standard
: 0.7 - 1.1 mm (0.028 - 0.043 in)
Allowable limit
: 1.7 mm (0.067 in)
Overrun clutch
retaining plate
Refer to
SAT135F
SAT203D
Specified clearance
Standard
: 0.45 - 0.85 mm
(0.0177 - 0.0335 in)
Allowable limit
: 1.85 mm (0.0728 in)
Forward clutch
retaining plate
: Refer to
SAT228D