REPAIR FOR COMPONENT PARTS
AT-353
[RE4F04B]
D
E
F
G
H
I
J
K
L
M
A
B
AT
Revision: November 2006
2006 Altima
Bearings
●
Make sure bearings roll freely and are free from noise, cracks,
pitting or wear.
●
When replacing taper roller bearing, replace outer and inner
race as a set.
ASSEMBLY
1.
Attach side gear thrust washers to side gears, then install pinion
mate thrust washers and pinion mate gears in place.
CAUTION:
Apply ATF to all parts during assembly.
2.
Insert pinion mate shaft.
CAUTION:
When inserting, do not damage pinion mate thrust washers.
3.
Measure clearance between side gear and differential case with
washers using Tool, according to the following procedure:
a.
Set Tool and dial indicator on side gear.
SPD715
SMT839
SMT087A
Tool number
—
(J-39713)
SCIA5396E