ASSEMBLY
AT-367
[RE4F04B]
D
E
F
G
H
I
J
K
L
M
A
B
AT
Revision: November 2006
2006 Altima
e.
Push down piston and retainer assembly and install snap ring
using Tool.
14. Install low one-way clutch to front planetary carrier by turning
carrier in the direction of the arrow shown.
15. Install snap ring using screwdriver.
CAUTION:
●
Forward clutch and bearing must be correctly installed
for snap ring to fit into groove of transaxle case.
●
Do not expand snap ring excessively.
16. Install needle bearing on transaxle case.
CAUTION:
●
Apply petroleum jelly to needle bearing.
●
Take care with the direction of needle bearing.
17. Install bearing race, needle bearing and high clutch hub on front
sun gear.
CAUTION:
●
Apply petroleum jelly to needle bearing.
●
Take care with the direction of needle bearing.
Tool number
: KV31102400 (J-34285 and J-34285-87)
SCIA5404E
SAT206F
SAT046D
SAT020F
SAT019F