AT-424
[RE5F22A]
A/T CONTROL SYSTEM
Revision: November 2006
2006 Altima
SPECIAL SHIFT MODE
Upslope Mode
When TCM detects upslope from load of engine torque and decrease of acceleration, this mode changes shift
points in high-speed side according to the upslope degree and avoids busy shift of A/T.
Downslope Mode
When TCM detects downslope from increase of acceleration with accelerator full close, this mode operates
moderate engine brake by changing shift points in high-speed side.
Hot Mode Control
This control lowers ATF temperature by changing shift points when the temperature is extremely high.
MANUAL MODE
Driver oneself can select favorite gear and enjoy sports driving of manual transmission sense by shifting lever
from D position to manual mode position and + (up shift) / - (down shift). But lock-up control is operated auto-
matically. Shift control is operated again by shifting from manual gear position to D position. Following control
is operated when manual mode.
Automated Up Shift Control
In order to avoid the over speed of the engine, up shift operate automatically, if it becomes over a constant
vehicle speed.
Automated Down Shift Control
In order to avoid the stall of the engine, down shift operate automatically, if it becomes under a constant vehi-
cle speed.
Up Shift Permission Control
In order to avoid the stall of the engine, up shift is done only at over a constant vehicle speed.
Down Shift Permission Control
In order to avoid the over speed of the engine, down shift is done only at under a constant vehicle speed.
UP/DOWN SHIFT LEARNING CONTROL
This control learns the pressure to each clutch or brake in order to reduce shifting shock at each shifting (Up,
Down, Manual down, Coast down).
N-D SHIFT CONTROL
This control improves the N-D shift quality due to controlling line pressure solenoid valve according to forward
clutch piston stroke learned in N-D shift learning control and applying best hydraulic pressure to forward clutch
at N-D shift.
N-D SHIFT LEARNING CONTROL
This control learns the forward clutch hydraulic pressure due to monitoring a forward clutch engaging time and
a rotation change rate.
N-R SHIFT CONTROL
This control improves the N-R shift quality due to controlling shift pressure solenoid valve according to direct
clutch piston stroke learned in N-R shift learning control and applying best hydraulic pressure to direct clutch
at N-R shift.
N-R SHIFT LEARNING CONTROL
This control learns the direct clutch hydraulic pressure due to monitoring a direct clutch engaging time and a
rotation change rate.
TORQUE REDUCTION CONTROL
This control improves the shift quality due to sending torque reduction request signal from TCM to ECM and
cutting engine torque increase of shift at N-D shift, N-R shift and 1
⇔
2
⇔
3
⇔
4
⇔
5.
If accelerator pedal is depressed rapidly, this control establishes the upper limit value of engine torque and
avoids engine flare at 2
⇔
3, 3
⇔
4 and 4
Þ
2 of clutch to clutch shift.