DTC P0732 A/T 2ND GEAR FUNCTION
AT-507
[RE5F22A]
D
E
F
G
H
I
J
K
L
M
A
B
AT
Revision: November 2006
2006 Altima
WITH CONSULT-II
1.
Start engine and select “A/T” with “DATA MONITOR” mode in
CONSULT-II.
2.
Make sure that ATF temperature is within the range below.
FLUID TEMP: More than 20
°
C (68
°
F)
If out of range, drive the vehicle to warm up the fluid.
3.
Accelerate vehicle to maintain the following conditions for at
least 12 consecutive seconds.
SLCT LVR POSI: “D” position
GEAR: 2nd position
[Vehicle speed and accelerator angle: 2nd gear position
retainable condition. (Refer to
WHEN SHIFTING GEARS - 9J500 MODELS"
.)]
Driving location: Driving the vehicle uphill (increased engine load) will help maintain the driving
conditions required for this test.
4.
If DTC is detected, go to
AT-510, "Diagnostic Procedure"
.
WITH GST
Follow the procedure “With CONSULT-II”.
BCIA0030E