AT-600
[RE5F22A]
TROUBLE DIAGNOSIS FOR SYMPTOMS
Revision: November 2006
2006 Altima
Engine Cannot Be Started In “P” or “N” Position
ECS009IH
SYMPTOM:
●
Engine cannot be started with selector lever in “P” or “N” position.
●
Engine can be started with selector lever in “D”or “R” position.
DIAGNOSTIC PROCEDURE
1.
CHECK STARTING SYSTEM
Check starting system. Refer to
.
OK or NG
OK
>> GO TO 2.
NG
>> Repair or replace damaged parts.
2.
CHECK CONTROL CABLE
Check the control cable.
●
Refer to
AT-628, "Control Cable Adjustment"
OK or NG
OK
>> GO TO 3.
NG
>> Adjust control cable. Refer to
AT-628, "Control Cable Adjustment"
3.
CHECK PNP SWITCH CIRCUIT
Perform self-diagnosis.
Do the self-diagnostic results indicate PNP switch?
YES
>> Check the malfunctioning system. Refer to
AT-478, "DTC P0705 PARK/NEUTRAL POSITION
NO
>> INSPECTION END
In “P” Position, Vehicle Moves When Pushed
ECS009II
SYMPTOM:
Even though the selector lever is set in the “P” position, the parking mechanism is not actuated,
allowing the vehicle to be moved when it is pushed.
DIAGNOSTIC PROCEDURE
1.
CHECK PNP SWITCH CIRCUIT
Perform self-diagnosis.
Do the self-diagnostic results indicate PNP switch?
YES
>> Check the malfunctioning system. Refer to
AT-478, "DTC P0705 PARK/NEUTRAL POSITION
NO
>> GO TO 2.
2.
CHECK CONTROL CABLE
Check the control cable.
●
Refer to
AT-628, "Control Cable Adjustment"
OK or NG
OK
>> GO TO 3.
NG
>> Adjust control cable. Refer to
AT-628, "Control Cable Adjustment"
3.
SYMPTOM CHECK
Check again.
OK or NG
OK
>> INSPECTION END
NG
>> Repair or replace damaged parts.