AT-700
[RE5F22A]
ASSEMBLY
Revision: November 2006
2006 Altima
69. Bend the lock washer using suitable tool.
70. Install range lever in manual valve lever sub assembly.
71. Tighten range lever nut to specified torque. Refer to
72. Install turbine revolution sensor in transaxle case.
73. Tighten new turbine revolution sensor bolt to specified torque.
Refer to
CAUTION:
●
Do not reuse seal bolt.
●
Apply ATF to O-ring.
74. Install revolution sensor in transaxle case.
75. Tighten new revolution sensor bolt to specified torque. Refer to
.
CAUTION:
●
Do not reuse seal bolt.
●
Apply ATF to O-ring.
76. Install new O-ring in A/T fluid charging pipe.
CAUTION:
●
Do not reuse O-ring.
●
Apply petroleum jelly to new O-ring.
77. Install A/T fluid charging pipe in transaxle housing.
78. Install A/T fluid cooler tube.
CAUTION:
Do not reuse copper washer.
79. Tighten A/T fluid cooler tube union to specified torque. Refer to
.
SCIA4139E
SCIA4138E
SCIA4137E
SCIA4136E
SCIA4135E