AT-80
[RE4F04B]
TROUBLE DIAGNOSIS - BASIC INSPECTION
Revision: November 2006
2006 Altima
1. CHECK BEFORE ENGINE IS STARTED
1.
CHECK A/T CHECK (POSITION) INDICATOR LAMP
1.
Park vehicle on flat surface.
2.
Move selector lever to P position.
3.
Turn ignition switch to OFF position. Wait at least 5 seconds.
4.
Turn ignition switch to ON position. (Do not start engine.)
5.
Does A/T check (position) indicator lamp come on for about 2
seconds?
Yes or No
Yes
>> GO TO 2.
No
>> Stop ROAD TEST. Go to
tion) Indicator Lamp Does Not Come On"
2.
CHECK A/T CHECK (POSITION) INDICATOR LAMP
Does A/T check (position) OFF indicator lamp flicker for about 8 sec-
onds?
Yes or No
Yes
>> Perform self-diagnosis and check NG items on the
DIAGNOSTIC WORKSHEET,
"TCM SELF-DIAGNOSTIC PROCEDURE (NO
TOOLS)"
No
>> 1. Turn ignition switch to OFF position.
2. Perform self-diagnosis and note NG items.
Refer to
AT-60, "TCM SELF-DIAGNOSTIC PROCE-
3. Go to
2. CHECK AT IDLE
1.
CHECK ENGINE START
1.
Park vehicle on flat surface.
2.
Move selector lever to P position.
3.
Turn ignition switch to OFF position.
4.
Turn ignition switch to START position.
5.
Is engine started?
Yes or No
Yes
>> GO TO 2.
No
>> Mark the box on the DIAGNOSTIC WORKSHEET. Go to
AT-219, "2. Engine Cannot Be Started In P and N Posi-
tion"
. Continue ROAD TEST.
LCIA0043E
WCIA0458E
LCIA0065E