TROUBLE DIAGNOSIS - BASIC INSPECTION
AT-83
[RE4F04B]
D
E
F
G
H
I
J
K
L
M
A
B
AT
Revision: November 2006
2006 Altima
With CONSULT-II
●
Using CONSULT-II, conduct a cruise test and record the result.
●
Print the result and ensure that shifts and lock-ups take place as
per Shift Schedule. Refer to
CONSULT-II Setting Procedure
CAUTION:
If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be
detected in self-diagnosis depending on control unit which carry out CAN communication.
1.
Turn ignition switch OFF.
2.
Connect CONSULT-II to data link connector, which is located in
left side dash panel.
3.
Turn ignition switch ON.
4.
Touch “START (NISSAN BASED VHCL)”.
5.
Touch “A/T”.
SAT601J
LCIA0042E
BCIA0029E
BCIA0030E