A/T SHIFT LOCK SYSTEM
AT-263
[RE4F04B]
D
E
F
G
H
I
J
K
L
M
A
B
AT
Revision: November 2006
2006 Altima
Component Inspection
ECS009AJ
SHIFT LOCK SOLENOID
●
Check operation by applying battery voltage to A/T device con-
nector.
CAUTION:
Be sure to apply the voltage of the correct polarity to the
respective terminals. Otherwise, the part may be damaged.
DETENT SWITCH
For Key:
●
Check continuity between terminals of the A/T device connector.
DETENT SWITCH
For Shift:
●
Check continuity between terminals of the A/T device connector.
KEY LOCK SOLENOID
Key Lock
●
Check operation by applying battery voltage to key switch and
key lock solenoid connector.
CAUTION:
Be careful not to cause burnout of the harness.
Terminal No.
9 (Battery voltage) - 10 (Ground)
SCIA3117E
Condition
Terminal
No.
Continuity
When selector lever is not in "P" position with
key inserted.
5 - 6
Yes
Except the above
No
SCIA3118E
Condition
Terminal
No.
Continuity
When selector lever is not in "P" position.
13 - 14
Yes
Except the above
No
WCIA0345E
Terminal No.
1 (Battery voltage) - 2 (Ground)
WCIA0455E