REPAIR FOR COMPONENT PARTS
AT-321
[RE4F04B]
D
E
F
G
H
I
J
K
L
M
A
B
AT
Revision: November 2006
2006 Altima
Reverse Clutch
ECS009B6
COMPONENTS
DISASSEMBLY
1.
Check operation of reverse clutch
a.
Install seal ring onto drum support of oil pump cover and install
reverse clutch assembly. Apply compressed air to oil hole.
b.
Check to see that retaining plate moves to snap ring.
CAUTION:
If retaining plate does not contact snap ring:
●
D-ring might be damaged.
●
Oil seal might be damaged.
●
Fluid might be leaking past piston check ball.
2.
Remove snap ring using suitable tool.
3.
Remove drive plates, driven plates, retaining plate, and dish
plates.
4.
Remove snap ring from reverse clutch drum while compressing
return springs using Tool.
CAUTION:
●
Set Tool directly over springs.
●
Do not expand the snap ring excessively.
5.
Remove spring retainer and return springs.
WCIA0372E
SCIA3316E
SCIA4886E
Tool number
: KV31102400 (J-34285 and J-34285-87)
SCIA5387E