AT-382
[RE4F04B]
SERVICE DATA AND SPECIFICATIONS (SDS)
Revision: November 2006
2006 Altima
*: Always check with the Parts Department for the latest parts information.
BRAKE BAND
Final Drive
ECS009BQ
DIFFERENTIAL SIDE GEAR CLEARANCE
DIFFERENTIAL SIDE GEAR THRUST WASHERS
*: Always check with the Parts Department for the latest parts information.
DIFFERENTIAL SIDE BEARING PRELOAD ADJUSTING SHIMS
*: Always check with the Parts Department for the latest parts information.
BEARING PRELOAD
TURNING TORQUE
Planetary Carrier and Oil Pump
ECS009BR
PLANETARY CARRIER
OIL PUMP
Anchor end pin tightening torque
N-m (kg-m, in-lb)
4.0 - 5.8 (0.4 - 0.6, 36 - 52)
Number of returning revolutions for anchor end pin
2.5
Lock nut tightening torque
N-m (kg-m, ft-lb)
31 - 36 (3.2 - 3.7, 23 - 27)
Clearance between side gear and differential case with
washer
mm (in)
0.1 - 0.2 (0.004 - 0.008)
Thickness
mm (in)
Part number*
0.75 (0.0295)
0.80 (0.0315)
0.85 (0.0335)
0.90 (0.0354)
0.95 (0.0374)
38424-81X00
38424-81X01
38424-81X02
38424-81X03
38424-81X04
Thickness
mm (in)
Part number*
0.48 (0.0189)
0.52 (0.0205)
0.56 (0.0220)
0.60 (0.0236)
0.64 (0.0252)
0.68 (0.0268)
0.72 (0.0283)
0.76 (0.0299)
0.80 (0.0315)
0.84 (0.0331)
0.88 (0.0346)
0.92 (0.0362)
31438-80X00
31438-80X01
31438-80X02
31438-80X03
31438-80X04
31438-80X05
31438-80X06
31438-80X07
31438-80X08
31438-80X09
31438-80X10
31438-80X11
Differential side bearing preload
mm (in)
0.05 - 0.09 (0.0020 - 0.0035)
Turning torque of final drive assembly
N-m (kg-cm, in-lb)
0.78 - 1.54 (8.0 - 15.7, 6.9 - 13.6)
Clearance between planetary carrier
and pinion washer
mm (in)
Standard
0.20 - 0.70 (0.0079 - 0.0276)
Allowable limit
0.80 (0.0315)
Oil pump side clearance
mm (in)
0.030 - 0.050 (0.0012 - 0.0020)