AT-460
[RE5F22A]
TROUBLE DIAGNOSIS
Revision: November 2006
2006 Altima
TCM INSPECTION TABLE
Data are reference value and are measured between each terminal and ground.
Terminal
Wire
color
Item
Condition
Data (Approx.)
1
L/B
A/T PV IGN relay
When turning ignition switch ON.
0 - 1.5V
When turning ignition switch OFF.
0V
3
L
CAN-H
–
–
4
P
CAN-L
–
–
5
L/Y
Manual mode
switch UP (+)
Selector lever: + side
0V
Other than the above
Battery voltage
6
L/R
Manual mode
switch DOWN (-)
Selector lever: - side
0V
Other than the above
Battery voltage
14
B
Ground
Always
0V
16
SB
Manual mode
switch AUTO
Selector lever: “P”, “R”, “N” or “D” position
0V
Selector lever: Manual shift gate position
Battery voltage
19
P/B
Manual mode
switch MANUAL
Selector lever: Manual shift gate position (neu-
tral)
0V
Other than the above
Battery voltage
21
G/B
Pressure control
solenoid valve B
ground
When engine is running with idle speed and
setting selector lever to “P” position.
0V
22
L
Revolution sensor
power supply
When turning ignition switch ON.
Battery voltage
When turning ignition switch OFF.
0V
23
G
Turbine revolution
sensor power sup-
ply
When turning ignition switch ON.
Battery voltage
When turning ignition switch OFF.
0V
24
OR/B
PNP switch A
Selector lever: “P” and “R” position
0V
Other than the above
Battery voltage
25
G/R
Shift solenoid
valve B
When shift solenoid valve B operates.
(When driving in 1st or 5th gear.)
Battery voltage
When shift solenoid valve B does not operate.
0V
26
PU/W
Shift solenoid
valve D
When shift solenoid valve D operates.
(When driving in 3rd, 4th or 5th gear.)
Battery voltage
When shift solenoid valve D does not operate.
0V
27
Y/R
Power supply
(Memory back-up)
Always
Battery voltage
28
W
Pressure control
solenoid valve C
ground
When engine is running with idle speed and
setting selector lever to “P” position.
0V