AT-510
[RE5F22A]
DTC P0732 A/T 2ND GEAR FUNCTION
Revision: November 2006
2006 Altima
TCM terminals and data are reference value. Measured between each terminal and ground.
Diagnostic Procedure
ECS009F6
1.
CHECK EACH SHIFT SOLENOID VALVE CIRCUIT
Perform “Diagnostic Procedure” for the following DTCs.
●
“DTC P0750 SHIFT SOLENOID VALVE A” (Refer to
AT-539, "Diagnostic Procedure"
●
“DTC P0755 SHIFT SOLENOID VALVE B” (Refer to
AT-544, "Diagnostic Procedure"
●
“DTC P0760 SHIFT SOLENOID VALVE C” (Refer to
AT-549, "Diagnostic Procedure"
.)
●
“DTC P0765 SHIFT SOLENOID VALVE D” (Refer to
AT-559, "Diagnostic Procedure"
.)
OK or NG
OK >> GO
TO
2.
NG
>> Repair or replace damaged parts.
2.
CHECK EACH PRESSURE CONTROL SOLENOID VALVE CIRCUIT
Perform “Diagnostic Procedure” for the following DTCs.
●
“DTC P0745 PRESSURE CONTROL SOLENOID VALVE A” (Refer to
AT-534, "Diagnostic Procedure"
●
“DTC P0795 PRESSURE CONTROL SOLENOID VALVE C” (Refer to
AT-578, "Diagnostic Procedure"
OK or NG
OK >> GO
TO
3.
NG
>> Repair or replace damaged parts.
Terminal
Wire
color
Item
Condition
Data (Approx.)
25
G/R
Shift solenoid
valve B
When shift solenoid valve B operates.
(When driving in 1st or 5th gear.)
Battery voltage
When shift solenoid valve B does not operate.
0V
26
PU/W
Shift solenoid
valve D
When shift solenoid valve D operates.
(When driving in 3rd, 4th or 5th gear.)
Battery voltage
When shift solenoid valve D does not operate.
0V
28
W
Pressure control
solenoid valve C
ground
When engine is running with idle speed and set-
ting selector lever to “P” position.
0V
35
L/Y
Pressure control
solenoid valve A
When engine is running with idle speed and set-
ting selector lever to “P” position.
300Hz
37
R/B
Shift solenoid
valve C
When shift solenoid valve C operates.
(When driving in 1st, 2nd, 3rd or reverse gear.)
Battery voltage
When shift solenoid valve C does not operate.
0V
40
L/G
Pressure control
solenoid valve A
ground
When engine is running with idle speed and set-
ting selector lever to “P” position.
0V
45
OR
Pressure control
solenoid valve C
When engine is running with idle speed and set-
ting selector lever to “P” position.
300Hz
46
W/G
Shift solenoid
valve A
When shift solenoid valve A operates.
(When driving in 1st gear.)
Battery voltage
When shift solenoid valve A does not operate.
0V