AT-554
[RE5F22A]
DTC P0762 SHIFT SOLENOID VALVE C STUCK ON
Revision: November 2006
2006 Altima
TCM terminal and data are reference value. Measured between each terminal and ground.
Diagnostic Procedure
ECS009GS
1.
CHECK SHIFT SOLENOID VALVE C SIGNAL
With CONSULT-II
1.
Start engine.
2.
Select “A/T” with “DATA MONITOR” mode in CONSULT-II.
3.
Drive vehicle and read out the value of “SFT SOL C OUT” and
“SFT SOL C MON”.
Without CONSULT-II
1.
Drive vehicle.
2.
Check voltage between TCM connector terminal and ground.
OK or NG
OK >> GO
TO
7.
NG
>> GO TO 2.
Terminal
Wire
color
Item
Condition
Data (Approx.)
37
R/B
Shift solenoid
valve C
When shift solenoid valve C operates.
(When driving in 1st, 2nd, 3rd or reverse gear.)
Battery voltage
When shift solenoid valve C does not operate.
0V
Monitor item
Condition
Indication
●
SFT SOL C OUT
●
SFT SOL C MON
When shift solenoid valve C operates.
(When driving in 1st, 2nd, 3rd or reverse gear.)
ON
When shift solenoid valve C does not operate.
OFF
SCIA2883E
Connector
Terminal
Condition
Voltage
(Approx.)
F57
37 - Ground
When shift solenoid valve C
operates.
(When driving in 1st, 2nd, 3rd or
reverse gear.)
Battery
voltage
When shift solenoid valve C
does not operate.
0V
SCIA2884E
