56
\K3
Nondestructive/expedited
\K5
Nondestructive/nonexpedited
In command state, transmit break to remote (if in reliable
mode):
\K0,1
Destructive/expedited
Command
Description
\K2,3
Nondestructive/expedited
\K4,5
Nondestructive/nonexpedited
In connect state, receives break at modem port (if in direct
mode):
\K0,2,4
Immediately sends break and enters command state
\K1,3,5
Immediately sends the break through
In connect state, receives break at modem port and sends to serial port:
\K0,1
Destructive/expedited
\K2,3
Nondestructive/expedited
\K4,5
Nondestructive/nonexpedited
\Nn
Set operating mode (Default=3)
\N0
Selects normal mode with speed buffering
\N1
Selects normal mode with speed buffering
\N2
Select MNP reliable mode
\N3
Select V.42 auto-reliable mode
\N4
Select V.42 reliable mode
\O
Originate reliable link
\Qn
Set serial port flow control (Default=3)
\Q0
Disables flow control
\Q1
XON/XOFF software flow control
\Q2
Unidirectional hardware flow control
\Q3
Bi-directional hardware flow control
\T0
Disable inactivity timer (Default=0)
\U
Accept reliable link
\Xn
Set XON/XOFF pass-through (Default=0)
\X0
Processes flow control characters
\X1
Processes flow control characters and passes to local or remote
\Y
Switch to reliable mode
\Z
Switch to normal mode
-Jn
Set V.42 detect phase (Default=1)
-J0
Disables the V.42 detect phase
-J1
Enables the V.42 detect phase
Summary of Contents for Communicator V.90
