the power station and then hold the AC power button to turn on
the output.
LCD Display
The built-in LCD display indicates three important values:
Inputs
Shows the amount of power (Watts) going into the power station while
charging.
Outputs DC/ AC Shows the amount of power (Watts) and output your devices will be using
while plugged into the Jauch power station.
Battery Level
Shows 5 segments 20%, 40%, 60%, 80%, 100% capacity. As you use your
power station, segments will disappear from the display, indicating the
remaining charge. When charging the power station, you will notice a battery
segment blinking. This indicates the current charge status. One your power
station is fully charged; all battery segments will be lit and remain solid.
Note: The failure code (see page 9) will appear at on the right side of the screen where you
originally can see the Input, DC and AC power.
