There are three ways to charge this Jauch Power Station.
CHARGING WITH SOLAR PANEL
1.
Place the solar panel somewhere where it can receive direct sunlight.
2.
Make sure that the open-circuit voltage of the solar panels falls within 16-60V. The maximum
input power of this power station is 600W (Max.)
3.
Turn off the power station and connect the solar panel with the DC Input (DC 16-60V/10A). The
screen will light up after the power station is turned on and shows the input power wattage.
4.
If you want to use the AC or DC outputs while charging the power station through the solar
panel, please press the AC or DC power button for more than one second.
CHARGING WITH CAR CHARGER
Insert one end of the car charger to the car cigarette lighter receptacle and insert the other end to
the input port of the power station. The battery icon will blink to indicate that the power station is
being charged.
CHARGE WITH AC ADAPTER
To charge this power station with the attached AC adapter insert one end of the adapter into a wall
outlet and insert the other end to the input port of the power station.
CHARGING YOUR JAUCH POWER STATION
