When the power bank is charging, you can monitor the battery status by checking the battery icon
on the display.
This power station comes with a built-in advanced control circuit. When the battery is fully charged,
it will stop charging automatically.
THROUGH USB OUTPUT
1.
Select the adapter that corresponds with your mobile devices and use it to connect the USB
power cable to the input port of your device:
2.
Plug the other end of the USB cable into one of the USB outputs of the power station.
3.
Once connected, the power bank will start to power your mobile devices automatically.
THROUGH DC OUTPUT
1.
Connect the DC power cable to the input port of your device.
2.
Plug the remaining end of the DC cable into the power station´s DC output port.
3.
Once connected, the power station will automatically begin powering the device.
THROUGH USB TYPE C OUTPUT
1.
Use the original USB Type-C cable for your device or the one included with the product
accessories.
2.
Insert the USB-C cable into the USB-C output port of the power bank and connect the power
station with the device that needs to be charged.
3.
The power station will automatically detect the load output and start powering the device.
THROUGH AC OUTPUT
1.
Connect the power cable to the input port of your device.
2.
Plug the remaining end of the AC cable into the power station´s AC output port.
3.
Once connected, the power station will automatically begin powering the device.
Note: When the power station is turned off, the AC Output will be disabled. When the power station
is turned on, AC output is turned off by default. Please hold the power button to turn on the power
station and then hold the AC power button to turn on the output.
USING YOUR JAUCH POWER STATION
