Please note: DC2 and DC3, as well as XT30 support a voltage range between 9-12.6V; The voltage is
not stabilized.
THROUGH USB TYPE C OUTPUTS
1.
Use the original USB Type-C cable for your device or the one included with the product accessories.
2.
To set the type-c ports, please press the power button first.
3.
Insert the USB-C cable into the USB-C output port of the power bank and connect the power station
with the device that needs to be charged.
4.
The power station will automatically identify the appropriate voltage for your device.
Please note: The USB-C output will not work, if you firstly connect the cables and secondly press the
USB-C power button.
THROUGH AC OUTPUTS
1.
Connect the power cable to the input port of your device.
2.
Plug the remaining end of the AC cable into the power station´s AC output port.
3.
Please select your appropriate voltage. For European devices, please use 220V.
4.
Please activate the AC outputs by pressing the AC power button. It will take a few seconds until
your device will be charged though the AC output.
Please turn off the AC outputs manually if you do not need them anymore.
Please fully-charge your Jauch Power Station before storage and charge it every 3 months. Keep the
power station away from water, flammable gas, corrosive material, metals, dust and salt.
Please check the suggested temperature ranges for short- and long-term storage.
Failure to maintain your Jauch Power Station by following these steps can result in battery damage
which will void the product warranty.
TECHNICAL SPECIFICATIONS
STORAGE AND MAINTENANCE
