21
TROUBLESHOOTING
Problem
Cause
Solution
Generator will not start
No fuel
Add fuel
Faulty spark plug
Replace spark plug
Generator starts but
runs roughly
Low oil level
Fill oil to the proper level
Place generator on a flat, level surface
Spark plug wire loose
Attach wire to spark plug
Generator shuts down
during operation
Out of fuel
Fill fuel tank
Low oil level
Fill oil to the proper level.
Place generator on a flat, level surface
Generator cannot
supply enough power
or overheating
Generator is overloaded
Review load and adjust.
Insufficient ventilation
Check for air restriction. Move to a well
ventilated area
No AC output
Cable not properly
connected
Check all connections
Connected device is
defective
Replace defective device
Circuit breaker is open
Reset circuit breaker
Loose wiring
Inspect and tighten wiring connections
“
AC OFF
”
is always on
the display module.
overload
Review load and adjust
Faulty cords or device
Check for damaged, bare or frayed wires.
Replace defective device