Configuration
Powering HPT 135
Power supply requirements
16
www.javad.com
Warning:
If the voltage supplied is below the minimum specification, the modem will suspend operation. If the
voltage supplied is above the maximum specification, the modem may be permanently damaged,
voiding your warranty.
Make sure cords are located so that will not be stepped on, tripped over, or otherwise
subjected to damage or stress. Do not operate equipment with a damaged cord or plug –
replace immediately. To reduce the risk of damage to the equipment, pull by the plug body
rather than the output cord when disconnecting the equipment.
Do not operate the supply if it has received a sharp blow, been dropped, or otherwise
damaged. Do not disassemble the supply.
Warning:
Before connecting the external power source and the modem, make sure that the power source
matches the modem’s voltage and current requirements.