Configuration
Configuring HPT135
Power supply requirements
19
www.javad.com
2.5. Configuring HPT135
1. Connect the computer and HPT 135, as described in “Connecting HPT135 and Computer”
on page 18. Turn on the HPT 135.
2. Start ModemVU.
3. Select the HPT135 (Figure 2-3), and click
OK
:
Figure 2-3. Options window
4. Select the COM port the HPT135 modem is connected to (Figure 2-4). Click
Connect.
Figure 2-4. Connect to ModemVU
5. On the
Radio Link
tab, set the following parameters (Table 2-1) and click
Apply
(Figure 2-
5 on page 21).