www.javad.com
17
Figure 26.
NetView Server tab
4. Select the receiver from the list of the connected
receivers and click
Parameters/Networking/WLAN
, to
setup the WiFi connection.
• Set the following IP parameters: WLAN Receiver
IP Address (10.1.10.120), WLAN Default Gateway
(e.g, 10.1.10.1), and WLAN Network Mask (e.g,
255.255.255.0).
• Set the AccessPoint parameters: WLAN Ac-
cess Point ID (enter SSID of JLink LTE), WLAN AP
mode(wpa).
• Set the WPA parameter: WLAN WPA Passphrase
(enter passphrase of JLink LTE).
• Set the WLAN Mode to on
• Click
Apply
.
Figure 27.
NetView WLAN configuration tab
After restating the device you can check WiFi con-
nection using
Status/WiFi
tab of web interface of JLink
LTE.
Figure 28.
WiFi status tab
Now TRIUMPH-2 can provide services trough
Internet by 1120-1125 port.
Summary of Contents for JLink LTE
Page 2: ... JAVAD GNSS Inc 2020 www javad com ...
Page 4: ...4 www javad com ...