www.javad.com
JNSGyro-2T Operator’s Manual
57
O P E R A T I O N
Loading OAFs
Loading OAFs
Javad Navigation Systems dealers provide customers with OAF files. For any
OAF related questions, E-mail JNS at options@javad.com. Please have your
board ID number available (see “Checking Firmware Version” on page 59).
1.
To load a new OAF follow steps one - three in “Checking an OAF” on page
2.
Click
Load
at the bottom of the
Option Manager
screen (see Figure 4-9 on
3.
Navigate to the location of the new Option Authorization File. OAFs have
.jpo extension and are unique to each board (Figure 4-10).
Figure 4-10. Load OAF
4.
Select the appropriate file and click
Open
(Figure 4-10). The new board
option loads onto the board and the Option Manager table updates.
5.
When finished, click
Exit
on the Option Manager screen, and then click
File->Disconnect
to prevent conflicts with serial port management.
Notice:
Because the JNSGyro-2T system consists of more than one
receiver boards, every board should have its own OAF.
