www.javad.com
JNSGyro-2T Operator’s Manual
65
T
ROUBLESHOOTING
5
In general, as long as you follow the maintenance and safety instructions pro-
vided in this manual, you should have few problems with your JNSGyro-2T
system. This chapter will help you diagnose and solve some common, minor
problems you may encounter with your JNSGyro-2T system.
Chapter Tip:
For assistance with complex problems, see “Obtaining Technical
Support” on page 68.
Things to Check First
Before contacting JNS Customer Support about any problems with the JNS-
Gyro-2T system, refer to the following list of basic suggestions that may help:
• Go through all external receiver connections carefully and make sure they
are not wrong or loose.
• Double-check the cables. Cables became defective more often than the
devices do.
• Check the sections below for available solutions.
• Reset the unit’s boards using PCView (
Tools->Reset receiver
).
• Restore factory default settings of the boards using PCView (click
Configuration->Receiver
, then
Set all parameters to defaults
).
• Clear the NVRAM (see “Clearing the NVRAM” on page 58).
• Initialize the file system (click
Tools->Initialize file system
; this will erase
all files inside the receiver).
Warning:
Do not attempt to repair equipment yourself. Doing so will
void your warranty and may damage the hardware.