Page
2
of
2
b. Power Off:
•
Press and hold the PWR button for 2 sec. (the LED will flash yellow).
•
The device will turn off.
•
For a long internal battery pack life, use the JAVAD supplied power cables and
adapter.
3. Device Connection
a. JMT via Bluetooth:
Connect the TRIUMPH-1M PLUS to JMT using Bluetooth. Open JMT and click on the
connection icon in the
upper right corner to open the ‘Connections screen. Select the
TRIUMPH_1M_PLUS_[S/N] with the Bluetooth radio check box enabled (Figure 1).
Figure 1: JMT Bluetooth Connection
b. NetView&Modem via USB:
Connect the TRIUMPH-1M PLUS to NetView&Modem using the USB cable (Micro B type,
labeled 14-578156-01). Open NetView&Modem and select the USB device port (Figure 2).
Figure 2: NetView&Modem USB Connection
4. Data Logging
Start and Stop data logging directly on the TRIUMPH-1M PLUS with the FN button (Figure 3).
Figure 3: Data Logging Via FN Button
Press and hold the FN button between 1
– 5 seconds to start / stop logging.
Start and stop data logging in JMT (Under Survey Settings), or in NetView&Modem (under the
Files menu).
5. Antenna Name
The TRIUMPH-
1M PLUS’ Antenna Name is “
JAVTRIUMPH_1MPR
”.
The antenna name is used
to call calibrated antenna phase center offsets.
