• Level Vial Camera:
Shows the pole level vials via the bottom camera. Clicking it will do noth-
ing.
• Offsets:
Click to go to the select by offset screen and continue there.
• Screen Center:
Centers the screen on receiver position
• Review:
Open Review screen.
•
Communication type:
Shows symbol of active communication channel for receiving the
corrections
6. Information
• Collect Time:
It shows elapsed time since collection of a point started.
• Dist to last:
Horizontal and vertical distance to the last accepted point.
• Dist/Dir to Last:
Horizontal and vertical distance and direction to the last accepted point.
• HRMS:
Shows Horizontal RMS of positions. Clicking it will do nothing.
•
Velocity (Horiz.):
Horizontal velocity calculated by standalone position.
• PDOP:
Shows PDOP. Clicking it will do nothing.
• Pdelta:
Current position offset from selected 1-st point
• Pdelta2:
Current position offset from selected 2-nd point
• Pdelta3:
Current position offset from selected 3-rd point
• VRMS:
Vertical RMS of RTK position
• RMS Status:
Shows RMS for RTK solution
7. Stake
• Accept:
Same as regular right bottom ‘Accept’ button. Accept stake point “as staked”. Adds
survey coordinate to design point.
• Accept as:
Accept as new point. Creates new survey point. Original design point is not
changed.
• Ahead/Back:
Shows direction to target by moving Ahead or Back
• CTT:
Course to target point by angle of difference between direction to design point and cur-
rent device orientation.
• CTT Arrow:
Course to target point by blue/green arrow
• Catch Point:
Calculate catch point offset. Catch point is the point where the alignment de-
sign side slope intersects with the ground.
• Cut/Fill:
Shows how much need to pour or dig along a vertical profile (depend of Design
Elevation)
• DTT:
Shows distance to current stake point
• Design Elevation:
Displays target point altitude. Depends on Antenna height.
• East/West:
Shows distance for moving to East or to West.
• North/South:
Shows distance for moving to North or to South.
• Offset:
Distance from current position to alignment line by perpendicular to that line.
• Right/Left:
Shows distance for moving to Left or to Right
• Select From Map:
Selecting point for Stake-Out directly from the map.
• Sequence:
Set up sequence in which existing points are staked and select subset of points
to be staked.
• Station:
Distance from current position to initial station along alignment line.
• Target Name:
Displays current Stake-Out point
