27
<THERMAL PRINT>
Choose the print option and set the result sheet form.
- Pre-set: ON
- Select
„THERMAL PRINT‟ and enter the menu.
- ON: Result sheet is printed after the measurement.
OFF: Result sheet is not printed after the measurement.
- Press
„RESULT SHEET FORM‟ and enter the menu.
- Select the print form and press
„SET‟ button.
- Press
„CLOSE‟ to get back to „THERMAL PRINT‟ menu.
- Press
„CLOSE‟ to get back to SYSTEM SETUP menu.
< MEASUREMENT MODE>
Select the measurement mode.
*Simple Measurement mode: Measure blood pressure on
both arms simultaneously at once.
*Three Measurement mode: Measure blood pressure on
both arms 3 times in a row. The average blood pressure is
displayed as a result.
- Pre-set: Simple measurement mode
- Select the
„MEASUREMENT MODE and enter the menu.
- Select either
„SIMPLE MEASUREMENT MODE‟ or „Three Measurement MODE‟.
- Set the interval time when
„Three Measurement MODE‟ is selected. The interval time is the
break time between three times of measurements. Select the time from 15sec, 30sec, 45sec
and 60sec. Press
„SET‟ to save the change.
- Press
„CLOSE‟ to get back to SYSTEM SETUP menu.
<
CONVERTING TO AUTO STANDBY MODE
>
After the measurement, the result screen automatically
returns to the initial screen.
- Pre-set: ON
- Select the
„Converting to auto standby mode‟ and enter the
menu.
- Select either
„ON‟ or „OFF‟.
- Press
„SET‟ to save the change.
- Press
„CLOSE‟ to get back to SYSTEM SETUP menu.
< LOGO >
Set
„LOGO‟ position.
- Select
„LOGO‟ and enter the menu.
- Select either
„THE UPPER LOGO‟ or „THE UNDER LOGO‟.
- If the user wants to delete LOGO press
„DELETE‟.
- Press
„SET‟ to save the change.
- Press
„CLOSE‟ to get back to SYSTEM SETUP menu.