- 99 -
Orion
- 324501G
DE
FR
EN
7.11- Receiver parameter erasing procedure
This procedure has the following effects :
• Erasing of all programmed transmitter(s) / receiver(s) associations,
• Erasing of all programmed interlockings,
• All relays operating mode turn by default mode : «Continuous
make contact».
The receiver parameter erasing procedure is done from the receiver by
,
and
jumpers/microswitches.
Only the radio channel setting is preserved
1
ORRS and ORRA receivers :
Switch off the receiver
ORRD receiver :
the receiver can remain powered up throughout the procedure
2
ORRS and ORRA receivers :
install the jumpers
,
and
to
con
fi
gure the settings.
ORRD receiver :
set the microswitches
,
and
to the «ON»
position.
R2
R3
R4
V1 V2 V3
JP1 JP2 JP3
V1 V2 V3
JP1 JP2 JP3
JP4
V1
V3
V2
JP3
ON
OFF
JP1
JP2
ORRS
ORRA
ORRD
3
ORRS and ORRA receivers :
Switch on the receiver
ORRD receiver :
go to the next step
4
V2
and
V3
ORRA
ORRS ORRD
LEDs
fl
ash 5 times during the parameter erasing, then
go off (except on
ORRD
DIN rail receiver, indicator lights stop to blink for a few
time and re-start to blink 5 times etc...).
All the receiver parameters (except the radio channel setting) are erased.
5
ORRS and ORRA receivers :
switch off the receiver and remove the
,
and
jumpers.
ORRD receiver :
set the
,
and
microswitches to the «OFF»
position.
Summary of Contents for Orion
