AAA-055-00138
Rev. 1/14/15
Jaylor Owner Manual
- 27 -
Mini Mixer Models
hydraulic oil cooler electric fan, hydraulic
valve solenoids, and auxiliary components
(if applicable).
9. Auger On/Off Control
– All units are
controlled by an electronic rocker switch
with ‘on’ and ‘off’ positions. For CE units,
switch must be in the ‘off’ position and ’
10.
Parking Brake
’ must be applied before
engine is started.
10. Parking Brake
– Equipped on CE units.
11. Hydraulic Oil Reservoir/Cap
– Remove
this cap to add oil. Glass level sight on the
side of the reservoir indicates proper oil
level range.
12. Remote Engine Throttle Control
– To
increase engine speed, push throttle lever
upward. To decrease engine speed, push
throttle lever downward.
13. Steering Wheel/Spinner
– Rotate the
steering wheel clockwise or
counterclockwise to steer the mixer.
14. Electronic Scale Indicator
– Displays the
weight inside the drum.
24. Additional Unloading Door (Optional)
-
Door can be opened to allow feed to be
discharged.
25. Additional Door Open/Close Control
(optional)
– Used to control feed discharge
rate.
26. Door Selector Switch (optional)
– Used to
select which door will be operated.
27. Hydraulic Oil Cooler Electric Fan Override
– Normally, fan is activated by internal
temperature switch. However, while the
override button is pressed in the fan will run
(with engine on). Test daily before feeding to
make sure cooler fan is functioning.
28. Engine Cover
–
Cover should be left in the
‘down’ position and secured during normal
operation to minimize the amount of feed that
could potentially land around the cooling
intake or on the exhaust. Cover can be
pivoted into the ‘up’ position and secured for
maintenance purposes.
29. Mixing Drum Mirror
– Equipped on CE
units. Gives the operator a wide-angle view
of the inside of the mixing drum while
standing safely on
‘7. Operator Platform’
.
